3xLOGIC VIGIL Server User Manual
Page 113
Memory
Warning
Threshold
This setting monitors the memory usage of the VIGIL Server
process. Due to limitations in Windows there is a limit on the
amount of memory a single process can address. If the process
reaches the configured threshold, a warning will pop up indicating
that the memory usage is high. If this warning pops up please con-
tact your system administrator or support department.
AUX Device
Settings…
Open the AUX Device Settings window for configuring other attached devices such as DIO boards and encoders.
Sub Stream
Settings…
On PROSERIES Cards, you can enable sub stream video
feed for analog video channels. Resolution, Quality,
FPS and Bitrate can be set. The Sub-Stream will be
available to VIGIL Clients connected to the VIGIL
Server.
Keyboard
Settings…
Allows you to add, edit, or remove a special camera control keyboard, such as the Pelco KBD300A.
Note:
The Pelco KBD300A F1 and F2 buttons can be used to latch on and off VIGIL Server Relays #1 and #2.
-
104
-
©2014 3xLOGIC Inc. | VIGIL Server - User Guide