3xLOGIC VIGIL Server - Manual (Page 127)

14.3 Remote Client Retry Settings
Connection Attempts The number of times to retry sending an alarm to a remote Client.
Retry Delay The number of seconds to wait between connection attempts.
14.4 Output Relay Settings
Select Outputs from the top of the Relays/Alarm tab page.
Select an Output Relay from the drop-down. Select Edit... to configure Output settings.
Configure Mode and Dwell time under the Settings section and assigning the output to a camera via the Cameras list.
14.4.1 Relay Override
This logical function is used to override a relay when another relay is in use. This will cause a relay which would normally trigger to
remain inactive when another specific relay has already been tripped.
- 118 - ©2014 3xLOGIC Inc. | VIGIL Server - User Guide