3xLOGIC VIGIL Server - Manual (Page 94)

Rule Settings Tab
Enable
Alarm
The Enter Alarm is triggered based on the number of people entering during a period of time. Check the Enter Alarm
checkbox to enable the alarm and then select number of people and period of time in seconds using the arrow select
tools.
Alarm
Dwell
The number of seconds of video recorded in alarm mode once the alarm is triggered.
Reset Sta-
tistics
when
Alarmed
Enable this option to reset the statistics to zero once the alarm is triggered.
Due to the nature of the data gathered, disabling the Reset Statistics When Alarmed feature can cause a flood of
notifications when the threshold is reached. Please refer to the
See "Reset Statistics when Alarmed" on page 80 sec-
tion for a graph visualizing the potential influx of notifications.
V-POS Exceptions
V-POS runs on the VIGIL Server and can be configured to monitor the POS data being captured by the VIGIL Server for pre-configured
Exception Events. These can be configured to look for specific transaction types based on a number of criteria including Video Ana-
lytics rules.
In the above Exception example, the Exception is set to monitor for VOID transactions on Register number 1 in combination with the
Occupancy Video Analytic for Register 1 having no people in the region, as represented by the Less Than or Equal to Zero. For more
Information on configuring V-POS, please consult the VIGIL Server/VIGIL Client user's guides.
©2014 3xLOGIC Inc. | VIGIL Server - User Guide - 85 -