3xLOGIC VIGIL Server - Manual (Page 69)

Video Analytics Alarms can also be used to Trigger TPZ events. Multiple Video Analytics Alarms can be assigned to one camera. All
Video Analytics Rules configured on the Server will show in the list, click the Checkbox beside the Rule Name to enable it.
Clicking the checkbox will open the PTZ Configuration window.
During Alarm
Select what action to apply during the DIO Alarm.
Mode Select Patterns, Presets or Tours from the drop-down box.
Name/Number Enter the Name or Number of the Pattern, Preset or Tour.
After Alarm
Select what action to apply after the DIO Alarm has ended. To do nothing after the alarm, select Disabled from the mode drop-
down.
Mode Select Disabled, Patterns, Presets or Tours from the drop-down box.
Name/Number Enter the Name or Number of the Pattern, Preset or Tour.
Dwell Time
The amount of time from when the DIO Alarm is triggered until the After Alarm event occurs. If Dwell Time is
not checked the After Alarm event will trigger when the DIO Alarm ends.
Control Interface
Enables the Push Button Directional controls for the camera in place of the virtual joystick.
Region Control is a setting that is only accessible on certain PTZ camera models. It is an alternative to
the traditional push button, joystick or on-screen drag method for controlling PTZ movement. Region
Control enables you to simply click on-screen to shift the cameras line-of-sight toward the region that
has been clicked.
- 60 - ©2014 3xLOGIC Inc. | VIGIL Server - User Guide