3xLOGIC VIGIL Server - Manual (Page 93)

Display Option
Select when the rule should be displayed in the live viewer. Show Rule will always dis-
play the rule, Not Show Rule will never display the rule, Show Rule When Alarmed
will only show the rule while the alarm is triggered.
Database Update Settings
Check Write Rule Result and set a frequency to write rule results to a local database
in set intervals.
Check Allow Data... to allow data from this rule to sync to a central database. If this
box is not checked, this rule will not sync to a central database. This allows for rules
that will be used in centralized reporting to sync to a central location, while rules
that are not needed for centralized reporting can stay local to the VIGIL Server and
not use bandwidth / resources on the central system.
Description Enter a description for this rule.
Region Settings Tab
Add
Click the Add button and then
click to draw the corners of the
region. Click on the original
point to complete the region.
Edit
Click the Edit button and then
click and drag the corners of the
region.
Clear
Click Clear to remove all bound-
aries from the image.
Freeze
Video
Click the Freeze Video button to
pause the live video. Click the
button again to display live
video.
Alert Settings Tab
Opens the Video Analytics Alert Settings window that allows you to sched-
ule the alarm recording period and configure alerts. The Video Analytics
Alert Settings window is the same as the Video Motion Alarm Advanced
Settings window. See the section on See "Recording Mode Tab" on page 53
under the Recording Settings Tab for configuration information.
- 84 - ©2014 3xLOGIC Inc. | VIGIL Server - User Guide