3xLOGIC VIGIL Server - Manual (Page 83)

9.1.9 Kinect™ Settings
When using a Microsoft Kinect™ Device for video analytics, the calibration options are different and will only appear when a Kinect™
is installed and has been assigned to a specific channel.
Tilt Angle The Kinect™ Sensor is motorized, you can adjust the angle that the head is pointed with the slider.
Detection
Method
Overhead Depth
Detection
Use this mode when the Kinect™ Sensor is mounted on the ceiling pointed down. The Kinect™ can
only operate between a certain height range (7.5 feet to 16.3 feet from the floor). Setting the
height of the Kinect™ allows the engine to estimate a person's physical dimensions.
Skeleton Detec-
tion
Use this mode to utilize the Kinect™ sensors ability to detect a person via extrapolating their
skeleton. Near mode will allow the Kinect™ sensor to detect as close as 16 inches. Tracking mode
can be toggled between Default (Full Body) and Seated (Shoulders only) detection modes.
Note: Kinect™ settings are available for configuration through both the Calibration and the Add Rule processes.
- 74 - ©2014 3xLOGIC Inc. | VIGIL Server - User Guide