3xLOGIC VIGIL Server - Manual (Page 35)

4.6.4 Markers
During playback, if only a sub-range of the loaded footage is of interest it can quickly be selected by using Markers. To use Markers,
select the Markers tab from the Advanced Features section.
Start / End Range
Position the footage navigation slider at the beginning of the sub-range and click the
Start Range button. You will notice a small marker appear below the starting point(cir-
cled in red, right.) Next, navigate to the end of the sub-range and click the End Range
button.
Clear
Removes the sub-range markers. If the sub-range is cleared when the View button is latched on, the play-
back will return from the sub-range to the fully loaded footage.
View
Loads the sub-range for playback. The playback information will indicate that a sub-range is currently dis-
played. All of the playback controls will operate on only the sub-range of footage.
Note: If multiple cameras are loaded for playback in Multi-Screen mode, each camera can have its own unique sub-range of
footage.
Note: If a sub-range has been defined, only the sub-range will be saved when video is exported.
4.6.5 Audio Playback
If audio recording is enabled and configured in the VIGIL Server settings, the Audio tab will become available in the Advanced Fea-
tures section of the Search window. Selecting an audio channel from this tab allows you to playback recorded audio along with video
footage.
To choose which audio channel to playback, select the channel from the drop-down menu in the
Audio tab.
All Audio
When selected, all audio from the specified channel is played back even when there is no cor-
responding video footage for the playback time.
Video Only Audio
When selected, audio from the specified channel is played back only when there is corresponding
video footage for the playback time.
This Audio Level Meter indicates the signal strength of the currently playing audio.
- 26 - ©2014 3xLOGIC Inc. | VIGIL Server - User Guide