3xLOGIC VIGIL Server - Manual (Page 16)

3.2 Camera Layout and Quick Access
Use the buttons in the top section of the Live Viewer side toolbar to select the viewing style. If you have more cameras enabled than
can be displayed by the current view settings, you can right-click on the layout icon and select a page of cameras to display.
Software Rendered mode for 32 channel systems has these available viewing options:
Single view mode (1 camera), 2 x 2 mode (4 cameras), 3 x 3 (9 cameras), 4 x 4 (16 cameras), 5 x 5 (25
cameras), 6 x 6 (36 cameras). 2 large w/8 small cameras, 1 large w/12 small cameras.
Hardware Rendered mode viewing options vary based on the system model.
To quickly select a camera for Single Live View display mode, click its corresponding number in the
Camera Quick Access pad. Camera Quick Access also provides a simple way to check the recording
status of each camera, which is communicated through color:
l
Green : Constant recording mode and is recording.
l
Blue : Motion recording mode and is recording (motion detected).
l
Red : Alarm recording mode and is recording (alarm triggered).
l
Yellow : Set to a motion recording mode and is recording (motion currently not detected and will
stop after the Post Motion Record time has elapsed).
l
Uncolored: Camera is currently not recording, but is enabled.
l
Disabled: Camera is not recording and is disabled.
To arrange the cameras within the current view style, right-click on a camera position in the Live Viewer window and select a cam-
era to be displayed from the context menu. Since you cannot display a camera in more than one location, if you selected a camera
that is already displayed, it will move the camera feed to the new location.
To remove a camera from the Live Viewer window, right-click that particular camera feed and select Stop.
Note: Stopping or changing camera feeds in the Live Viewer window does not affect the recording settings.
When in Software Rendered mode, right-click a camera feed to view the following options:
Copy Copies the current video image to the Windows clipboard.
Full
Screen
Enlarges the live video feeds to fill the entire PC window.
Note: To zoom in on an image in Full Screen mode, hold down the keyboard Control key and left-click. To zoom
out on an image, hold down the Control key and right-click.
Quick
Search
Plays recent footage for the selected camera in the Playback window; select from One, Five, or Ten minutes before the
current time.
Zoom Opens the zoom control. Left-click on an image to zoom in and right-click to zoom out.
OSD
Enable On-Screen Display
Enable on-screen display of POS Data. This option will be
available if the camera is configured as a POS Priority Cam-
era.
Configure OSD
Opens the OSD Configuration Window. See "On-Screen Dis-
play - POS/ATM Data " on page 28.
Stop Stops the video feed from being displayed, but does not stop recording.
Reset
to
Default
Resets all cameras to their default position for the current camera layout.
Camera
Control
Opens the Camera Control pad that allows users to control PTZ cameras.
Digital
PTZ
Enable Digital PTZ to use PTZ control features within a fixed camera image. Zoom in and then use the PTZ control to pan
and tilt within the fixed image. This option is available and enabled by default for all cameras that do not have alter-
©2014 3xLOGIC Inc. | VIGIL Server - User Guide - 7 -