3xLOGIC VIGIL Server - Manual (Page 50)

8 Settings – Camera Setup Tab
VIGIL Server is a diverse software application that interfaces with a wide variety of hardware configurations. A comprehensive set of
customization controls is available to configure the VIGIL Server as required. This section will describe the available settings in
detail.
Opens the VIGIL Server Settings window, which can also be accessed via the main menu:Tools | Settings. When mak-
ing changes, click the Apply button to save and continue making changes, or click OK to save and return to the main
VIGIL Server window. Click Cancel to close the settings without saving changes.
The Camera Setup Settings allow configuration of the camera image, resolution, recording speed, buffering and CODEC. Network
cameras are also enabled under the Camera Setup tab.
Click the Apply to All button at the top of the window to apply the same settings to all cameras. Settings that
will be applied to all cameras will be indicated by BOLD headings.
Note: Only changes made after clicking Apply to All will be applied to every camera.
©2014 3xLOGIC Inc. | VIGIL Server - User Guide - 41 -