3xLOGIC VIGIL Server - Manual (Page 111)

10.7 Clients Tab
The Clients tab indicates how client connections should be handled. A Client Connection represents a network connection to the
VIGIL Server from an outside source(VIGIL Client, View Lite Smart Device App, 3xCLOUD, VIGIL Web, etc.)
Allow RapidStream
in Client
When enabled, the Playback window in VIGIL Client will have the option to playback video at Full Resolution
or at a CIF Resolution using RapidStream technology.
Disable Rap-
idStream if Server
CPU Usage
Exceeds...
The RapidStream playback on Client is handled by the Server before sending the playback stream to the
Client. To ensure functionality of the VIGIL Server is not adversely affected, the RapidStream playback will
be disabled if the CPU on the Server reaches the specified percentage. When the CPU usage drops back below
the percentage the RapidStream option will again be available. This can happen dynamically during play-
back.
Max Network Con-
nections
Enter the maximum number of simultaneous client connections allowed.
10.8 Sequence Tab
The Sequence tab configures the camera display sequences for the analog output monitors or the analog live viewer. A sequence can
be configured for hardware rendered live view using analog or IP cameras.
Monitor Number Select the analog output monitor number for the sequence.
Auto Start
Sequence
When enabled, the sequence for the selected analog output monitor is started automatically when VIGIL
Server starts.
Add Add a new camera to the sequence with a specified dwell time.
Edit Modify the dwell time of the selected camera.
Delete Remove the selected camera from the sequence.
Up / Down Moves the selected camera up/down in the sequence.
- 102 - ©2014 3xLOGIC Inc. | VIGIL Server - User Guide