ADLINK cPCI-9116 - Manual (Page 78)

68
• C++ Library
6.8.7 _9116_AD_Set_Retrig
@ Description
Set the number of re-trigger counts when post-trigger or delay-trigger
mode is selected.
@ Syntax
C/C++ (DOS)
int _9116_AD_Set_Retrig( I16 card_number, I16 retrig_en, U16
retrig_no);
@ Argument
card_number: the card number of cPCI-9116 to be initialized,
totally 4 cards can be initialized, the valid card
numbers are CARD_1, CARD_2, CARD_3,
CARD_4.
retrig_en: Enable/disable re-trigger mode acquisition when
post-trigger or delay-trigger mode is selected.
0: disable re-trigger
1:
enable re-trigger
retrig_no: Number of re-trigger counts. Range: 1 through to
65535
@ Return Code
ERR_NoError
ERR_BoardNoInit