ADLINK cPCI-9116 - Manual (Page 92)

82
• Software Utility & Calibration
7
Software Utility & Calibration
This software CD provides a utility program, 9116util.exe, and is intended for:
Calibration and Functional Testing. This utility is a menu-driven design and
operates under the DOS environment. The text messages gives operating
guidance, with graphics to indicate correct hardware configuration and location.
The utility is described in the following sections. Note that the software driver
for the cPCI-9116 and cPCI-9116R are the same.
7.1 Running 9116util.exe program
After finishing the DOS installation, you can execute the utility by typing the
following command. (Assuming the utility is located in
C:\ADLINK\9116\DOS_BC\Util directory, the following command should be
entered at the DOS prompt.
C> cd\ADLINK\9116\DOS_BC\Util
C> 9116UTIL
The following diagram will be displayed on you screen. The message at the
bottom of each window guides you through the selected item.