ADLINK cPCI-9116 User Manual
Page 88
78
• C++ Library
@ Return Code
ERR_NoError
ERR_BoardNoInit
6.12.2 _9116_GP0_Set_Count
@ Description
This function is used to set the initial count value of GPTC
@ Syntax
C/C++ (DOS)
int _9116_GP0_Set_Count ( I16 card_number, U16 GP_value )
@ Argument
card_number:
the card number of cPCI-9116 to be initialized,
totally 4 cards can be initialized, the valid card
numbers are CARD_1, CARD_2, CARD_3,
CARD_4.
GP_value:
16-bit count initial value
@ Return Code
ERR_NoError
ERR_BoardNoInit
6.12.3 _9116_GP0_Set_CLK
@ Description
This function is used to select the clock source of GPTC
@ Syntax
C/C++ (DOS)
int _9116_GP0_Set_CLK( I16 card_nmber, U8 clk_src)
@ Argument
card_number:
the card number of cPCI-9116 to be initialized,
totally 4 cards can be initialized, the valid card
numbers are CARD_1, CARD_2, CARD_3,
CARD_4.
Clk_src :
0: internal clock source(24MHz timebase)
1: external clock source from pin96 of J1
@ Return Code
ERR_NoError
ERR_BoardNoInit