Echelon Lumewave CRD 3000 Street Light Bridge - Manual (Page 117)

Street Light Bridge Integrator’s Guide 107
Variable Description Ok to Modify?
nciLedTimeout Defines the timeout for the LEDs
on the CRD 3000 Street Light
Bridge module. The timeout starts
at each reset or power up of the
device.
Yes
Default value is 60 minutes. Set
to 0 (zero) to leave LEDs on
indefinitely, for example during
installation debugging. See
Verifying Successful Installation
on page 17 for more information
about the device LEDs.
nviErrMode Controls error simulation mode. Yes
See Simulating Communications
Errors on page 44 for information
about error simulation.
nviErrRate Defines the error rate for error
simulation mode.
Yes
nciErrTimeout Defines the error timeout for error
simulation mode.
Yes