Echelon Lumewave CRD 3000 Street Light Bridge - Manual (Page 83)

Street Light Bridge Integrator’s Guide 73
4. To place a device back online, select one or more devices to set online,
right-click a selected device, select Manage, and select Set Online.
Alternatively, you can select the Smart Network Management checkbox
for the Application Status property from the Setup tab of the device
Web page and then click Submit, or you can change the Application
Status property to Application Running (Online) and click Submit.
Testing Devices
You can use the Segment Controller to query the status of a device and to wink a
device. You can query the status of a device to ensure that it is operating and
that it is configured correctly. Querying a device opens a dialog that lists
network traffic statistics that you can use to evaluate the performance of the
device. Winking a device enables you to identify the device on the network and
verify that it is communicating properly.
Querying Devices
You can query a device to evaluate its performance and diagnose problems. It is
recommended that you query devices under both normal and peak conditions. To
query a device, perform the following steps:
1. Right-click the device, select Manage, and select Query Status.
2. The Query Status dialog opens.