Echelon Lumewave CRD 3000 Street Light Bridge - Manual (Page 59)

Street Light Bridge Integrator’s Guide 49
• The location of the device (select External)
• The XIF file for the device (for example, “slb-normal”)
3. Click OK to add the device. It is added to the tree of its parent channel.
4. Click Submit on the main Segment Controller page to accept the change
to the network.
5. Repeat steps 1–4 for each device on the network to be installed.
Entering Device Locations and Neuron IDs
Use the Segment Controller Web pages to enter the locations and Neuron IDs of
the devices being installed:
1. Select the device from the LON device tree to display the device
properties page.
2. From the Setup tab, specify the 12-digit hex string comprising the
device’s Neuron ID in the Neuron ID field.
3. You should also enter a description of the device location such as a light
pole number or GPS coordinates that can be associated with the device in
the Geographical Position field.
4. Click Submit. The Segment Controller discovers the repeating path for
the device and commissions it.
5. Repeat steps 1–5 for each device on the network to be installed.
Selecting Devices
After entering the locations and Neuron IDs of the devices to be installed, you
select those devices on the tree:
1. Select one or more devices from the tree to be installed.