Echelon Lumewave CRD 3000 Street Light Bridge - Manual (Page 68)

58 Managing a Street Lighting Network
Available Proxies The approximate number of repeating devices that can directly
communicate with the device, including the current proxy. The
signal strength at the repeating device and the number of hops
required to reach it determine whether a repeating device can
serve as a proxy for a given device.
Failure History
(24h).
Lists the 45-minutes intervals within the current 24-hour period
in which a device failure (if any) was reported.
Note: The data displayed in the Web page are cached values (not real-
time measurements). You can click Refresh to get the latest cached
values.
Repeating devices marked offline (red) in the tree view might not be
marked as such in the Powerline Repeating Analysis Web page; likewise,
devices marked offline (red) in the Powerline Repeating Analysis Web
page might not be marked as such in the tree view. Furthermore, there
could be a significant delay for a device in this Web page to show the
offline state if you have not configured the Use Offline Delay property
in the Setup – LON Channel Driver Web page. See Configuring the
LonWorks Channel for Power Line Repeating on page 25 for more
information about setting this property.
5. You can display the following advanced diagnostic statistics for a given
target device by clicking the Display Advanced Information checkbox:
Commission
Status
Indicates whether the device has been commissioned. The
values that can appear in this field and their colors depend on
whether the device has successfully been installed (black), is
being installed (orange), or has an error (red).