Mportant – EXFO IQS-12002B Calibration System User Manual
Page 103
Configuring the FTB-7000D OTDR on the IQS-12002B
Calibration System
99
Creating the GP-121310: Calibration Instrument for Singlemode, Front-Connector Position
Note: When the basic model of the calibration instrument is configured to appear
in the Calibration Certificate produced by the IQS-12002B, the information
you enter in the Inventory number box will appear in the Calibration
Certificate in the section entitled “Standards used to establish traceability”.
2d. Select Calibrated (no recalibration required) and click OK.
3. From the Add a Calibration Event window, enter the date as written
on the instrument calibration certificate, and click OK.
4. From the View Standard Parameters window, click Edit to enter the
length given on the acceptance test plan for all requested wavelengths.
5. Click Close.
I
MPORTANT
Do not change the Length_Tolerance parameter.