EXFO IQS-12002B Calibration System - Manual (Page 99)

Configuring the FTB-7000D OTDR on the IQS-12002B
Calibration System 95
Creating the GP-120963: Singlemode Dead-Zone Calibration Instrument
Creating the GP-120963: Singlemode
Dead-Zone Calibration Instrument
This section presents the procedure to create the dead-zone calibration
instrument. This calibration instrument is created using the length given on
the acceptance test plan.
To create the calibration instrument:
1. From the Add a standard window, enter the relevant information:
1a. Match the calibration instrument appearing in the Calibration
Instrument list to the instrument you intend to create.
The calibration name will be displayed in the Calibration
Instrument list.
1b. Enter the instrument serial number.