EXFO IQS-12002B Calibration System - Manual (Page 31)

Operating Your Calibration System
Calibration System 27
Viewing the Required Instruments
Viewing the Required Instruments
Before launching a test sequence, you can view the instruments that are
required. This way, you will not have to turn off the controller or expansion
units to insert the instruments and wait for the warmup period.
To view the required instruments:
1. From the Configuration menu, click Scenario.
2. Select the desired DUT type and model, and click Search.
3. From the Scenarios box, select a test scenario.
4. Click Calibration Instruments to view the list of instruments required
for the selected scenario.
5. Repeat steps 3 and 4 for every scenario to be included in the sequence.
6. Close the windows to return to the application main window.