EXFO IQS-12002B Calibration System - Manual (Page 87)

Configuring the FTB-7000D OTDR on the IQS-12002B
Calibration System 83
Creating the GP-121317: 17.6-km Fiber Spool as a Calibration Instrument
Creating the GP-121317: 17.6-km Fiber Spool
as a Calibration Instrument
This section presents the procedure to create the 17.6-km fiber spool as a
calibration instrument.
To create the calibration instrument:
1. From the Add a standard window, enter the relevant information:
1a. Match the calibration instrument appearing in the Calibration
Instrument list to the instrument you intend to create.
The calibration name will be displayed in the Calibration
Instrument list.
1b. Enter the instrument serial number.
1c. Enter the inventory number and comments if necessary.
Note: When the basic model of the calibration instrument is configured to appear
in the Calibration Certificate produced by the IQS-12002B, the information
that you enter in the Inventory number text box will appear in the section
entitled Standards used to establish traceability.
1d. Select No calibration required and click OK.