EXFO IQS-12002B Calibration System - Manual (Page 98)

Configuring the FTB-7000D OTDR on the IQS-12002B
94 IQS-12002B
Creating the GP-121310: Calibration Instrument for Singlemode, Front-Connector Position
4. From the View Standard Parameters window, click Edit to enter the
length given on the acceptance test plan for all requested wavelengths.
5. Click Close.
I
MPORTANT
Do not change the Length_Tolerance parameter.
I
MPORTANT
Now that you have created a calibration instrument for
UPC connectors, you must manually create a calibration instrument
for APC connectors. For more information, see Creating the
GP-121310: Calibration Instrument for Singlemode,
Front-Connector Position (APC Connectors) on page 98.