EXFO IQS-12002B Calibration System User Manual
Page 36
Advertising
Operating Your Calibration System
32
Performing a Test
7. Under Work type, select the operation you want to perform. The
available choices depend on the type of device you are testing and on
available instruments.
8. Under Additional info, enter the information that will appear in the
report.
9. Click Next.
10. In the Fiber selection box, specify the fiber connector, the fiber
adapter, and the fiber type you are using.
11. Click Next
To indicate if the
test is performed
by your company
or on behalf of
EXFO.
To add the selected
comments to your
report.
Advertising