Charge air cooler installation – Vortech 2005-2009 Ford 4.6L 3V Mustang GT User Manual
Page 16
P/N: 8N020-120
© 2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
23SEPT08v3.0(8N..120v3.0)MaxflowPwrClr
6
1.
Raise the vehicle with a floor jack and set on jack
stands.
2.
Remove the seven 5.5mm headed screws retain-
ing the lower splash panel. (See Fig.
3-a.)
3.
Remove the six Phillips-head screws (3 each
side) on the lower portions of the plastic innner
fender liners. (See Fig. 3-b.)
4.
Remove the five plastic clips retaining the front
portion of the fender liner. Both sides need to be
removed. (See Fig. 3-c.)
5.
Remove the four 10mm nuts (2 each side) retain-
ing the bumper cover to the fenders. (See Fig.
3-d.)
3A. BUMPER COVER AND SPLASH PAN
3.
CHARGE AIR COOLER INSTALLATION
Fig. 3-a
Fig. 3-b
Fig. 3-c
Fig. 3-d
10mm
HEADED
BOLTS
INNER
FENDER
LINER
SPLASH
PANEL