Vortech 2005-2009 Ford 4.6L 3V Mustang GT - Manual (Page 44)

P/N: 8N020-120
© 2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
23SEPT08v3.0(8N..120v3.0)MaxflowPwrClr
34
7. FINAL CHECK
A. Check all fittings, hose and clamps for tightness
and leaks. Make sure all wires and lines are prop-
erly secure with clamps or tie-wraps.
B. Make sure all wires and hoses are routed away
from hot, moving or sharp objects.
C. Double check to ensure water is flowing through
the system.
D. Test drive the vehicle.
E. Always listen carefully for engine detonation.
Discontinue heavy throttle usage if detonation is
heard.
WARNING: Do not attempt to operate the vehicle
until ALL components are installed and ALL
operations are completed including the final
check.
NOTE: Check to see that CAC coolant is flowing
through the surge tank. If coolant is not flow-
ing, remove the 3/4" rubber hose from the
side of the surge tank and apply light suction
in an attempt to pass any trapped air in the
system. Reconnect the hose and recheck
coolant flow.