Vortech 2005-2009 Ford 4.6L 3V Mustang GT User Manual
Page 24
P/N: 8N020-120
© 2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
23SEPT08v3.0(8N..120v3.0)MaxflowPwrClr
14
3B. WATER COOLER ASSEMBLY INSTALLATION, CONT’D
21. On the passenger’s side of the engine, attached
to the valve cover, is a large wire harness. The
harness will have to be relocated to gain clear-
ance for the surge tank and the radiator overflow
reservoir. (See Figs. 3B-n, 3B-m.)
22. Detach the wiring harness from the retaining clips
and move the harness to the shock tower. Secure
the harness to the A/C line with wire ties. (See
Fig.
3B-n.)
23. Remove the small clip retaining the small wiring
harness to the shock tower. (See Fig. 3B-n.)
24. Attach the small harness to the large harness with
wire ties.
25. To gain clearance for the coolant reservoir, the
A/C line will need to be bent slightly towards the
passenger’s side fender. (See Fig. 3B-n.)
NOTE: A/C line is under high pressure. Use caution
not to kink or damage the line.
(2005-2006 Only)
26. Remove the 10mm headed screw retaining the
ground strap to the bracket on the strut tower.
(See Fig. 3B-o.)
Fig. 3B-m
Fig. 3B-n
Fig. 3B-o
GROUND
STRAP
2005-2006
LOCATION
ONLY
SECURE
HARNESS
WITH WIRE-TIES
BENT
A/C LINE