Vortech 2005-2009 Ford 4.6L 3V Mustang GT - Manual (Page 39)

P/N: 8N020-120
© 2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
23SEPT08v3.0(8N..120v3.0)MaxflowPwrClr
29
A. Re-attach the 3/8" hose to the 1/4"NPT x 3/8"
hose x 90° fitting installed in the inlet duct.
B. Attach the 1" bypass outlet hose to the 90° plastic
fitting and secure the hose with a #16 hose clamp.
C. Re-install the duct to the inlet of the supercharger
and secure in place with the clamps previously
removed
D. Install the 180° duct and the MAF sensor with fil-
ter to the inlet duct leading to the Supercharger.
(See Figs. 4-a, 4-b.) Clock the MAF exactly as
shown in the figure.
E. Secure the rear clamp at the inlet duct union to
the previously installed support bracket. (See Fig.
4-b.).
4. AIR INLET ASSEMBLY
Fig. 4-b
Fig. 4-a
AIR INLET
SUPPORT
BRACKET