Vortech 2005-2009 Ford 4.6L 3V Mustang GT - Manual (Page 33)

P/N: 8N020-120
© 2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
23SEPT08v3.0(8N..120v3.0)MaxflowPwrClr
23
3E. ENGINE COOLANT RESERVOIR INSTALLATION (2007-2008 MODELS ONLY), CONT’D
Fig. 3E-i
Fig. 3E-h
Fig. 3E-j
TRIM FAN SHROUD AS
NEEDED
FOR HOSE CLEARANCE
9. Modify the small hose removed from the factory
coolant overflow reservoir. By cutting the "S” bend
off the hose end. (See Fig. 3E-h.)
10. Install a 3/8" union and a #17 stepless clamp.
Secure the clamp. Using a length of 3/8" (approxi-
mately 40" long) hose that is provided, secure the
hose to the union with a #17 stepless clamp.
(See Fig.
3E-i.)
11. Route the overflow hose across the radiator and
under the radiator retaining bracket to the
1/4"NPT x 3/8" hose barb fitting in the coolant res-
ervoir securing with a clamp. (See Fig. 3E-j.)