Vortech 2005-2009 Ford 4.6L 3V Mustang GT - Manual (Page 40)

P/N: 8N020-120
© 2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
23SEPT08v3.0(8N..120v3.0)MaxflowPwrClr
30
4. AIR INLET ASSEMBLY, CONT’D
F. Attach the 3/8" hose previously connected to the
passenger’s side valve cover, to the 1/4"NPT x
3/8" hose x 90° fitting installed in a previous step.
G. Attach the 1" bypass outlet hose to the 90° plas-
tic fitting and secure the hose with a #16 hose
clamp.
H. Install the duct to the inlet of the supercharger
and secure in place with the clamps provided.
I. Locate and install a 4.0" x 2.0" long sleeve to the
inlet of duct 4FU012-010 and secure with two
#64 clamps. (See Fig. 4-e.)
J. Remove the Factory MAF sensor element from
the top portion of the air filter housing.
K. Install the element using the 4mm hardware pro-
vided to the supplied MAF tube. (See Figs. 4-f,
4-g.)
Fig. 4-e
Fig. 4-f
Fig. 4-g
TO MAF
FACING
AIR
FILTER