Vortech 2005-2009 Ford 4.6L 3V Mustang GT - Manual (Page 31)

P/N: 8N020-120
© 2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
23SEPT08v3.0(8N..120v3.0)MaxflowPwrClr
21
Fig. 3E-a
Fig. 3E-b
Fig. 3E-c
3E. ENGINE COOLANT RESERVOIR INSTALLATION (2007 - 2008 MODELS ONLY)
1. Locate assembly 8N155-082.
2. Attach the rear reservoir mounting bracket
4FU010-091 to the reservoir with the 1/4-20 x 1/2"
long bolts and washers provided. (See Fig. 3E-a.)
3. Attach bracket 4FU010-061 to the front of the res-
ervoir with the hardware provided. (See Fig.
3E-b.)
4. Locate and install 1/4"NPT x 3/8" barbed fitting in
the tapped hole just above the previously installed
mounting bracket. This hole may have to be
opened using the approppriate drill bit. (See Fig.
3E-c.)
4FU010-091
RESEVOIR
BRACKET
8N055-080
OVERFLOW
TANK