Reflash computer, cont’d – Vortech 2005-2009 Ford 4.6L 3V Mustang GT User Manual
Page 43
P/N: 8N020-120
© 2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
23SEPT08v3.0(8N..120v3.0)MaxflowPwrClr
33
6.
REFLASH COMPUTER, CONT’D
NOTE: Do not disturb the cable, or turn the ignition
off during this time. If the programming is dis-
rupted, the computer will not start or run your
vehicle!
Fig. 6-c
ESCAPE
ENTER
OR
SELECT
ARROWKEYS
K.
Select “Performance Tune” and press the enter
button in the middle of the arrow keys. (See Fig
6-c.)
L.
Read the disclaimer entirely, then select agree
and press enter.
M. At this point please read the screen displayed on
the reflash tool. If you have any questions, either
refer to the manual that is provided with the
reflash tool or contact our service department for
further assistance.
N.
Turn the ignition on (do not start the vehicle). Set
the parking brake and press the enter button to
continue.
O.
SELECT TUNE will be displayed at the top of the
screen. Use the arrow keys to select the appropri-
ate tune for your vehicle and press the enter but-
ton. You will have a choice of four to choose from:
1. STD OUTPUT (non charge-cooled)
2. Charge-cooled, air/water (Choose this option)
3. Charge-cooled, air/air (this option is NOT
used in this application)
4. Original Backup
P.
Continue to follow the screen and when finished
unplug the reflash tool from the vehicles OBD2
port.