Vortech 2005-2009 Ford 4.6L 3V Mustang GT - Manual (Page 41)

P/N: 8N020-120
© 2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
23SEPT08v3.0(8N..120v3.0)MaxflowPwrClr
31
A. Locate assembly 4FU112-010.
B. Remove two of the 3/8-16 x 1" bolts securing the
supercharger in place. Install the air inlet support
bracket and secure with the 3/8" bolts removed
from the supercharger mounting plate. (See Fig.
5-a.)
C. Install the Two 3/4"NPT x 1" x 90° plastic fittings
to the air inlet duct. (See Fig. 5-b.)
D. Install the 1/4"NPT x 3/8" hose barb fitting in the
location noted. (See Fig. 5-c.)
D.2 (V-Power Only) Drill out the second 3/4" NPT
location on the air inlet duct using caution not to
damage the threads and install the second 3/4"
NPT x 1 x 90° plastic fitting to the air inlet duct.
Orient both fittings as shown in Fig 5-d2.
E. Attach the 4.0" x 3.5" reducer sleeve to the inlet
duct. Secure the sleeves with the clamps provid-
ed. (See Fig. 5-d.)
Fig. 5-a
Fig. 5-d
Fig. 5-c
Fig. 5-b
3/4"NPT x 1" x 90°
BARBED FITTING
1/4"NPT x 3/8" x 90°
HOSE BARBED
FITTING
5. AIR INLET ASSEMBLY (V-POWER / BULLITT KITS ONLY)
Fig. 5-d2 (V-Power Only)