Vortech 2005-2009 Ford 4.6L 3V Mustang GT User Manual
Page 30
P/N: 8N020-120
© 2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
23SEPT08v3.0(8N..120v3.0)MaxflowPwrClr
20
Fig. 8D-a
Fig. 8D-b
Fig. 8D-c
3D. RADIATOR HOSE MODIFICATIONS (2005-2006 MODELS ONLY)
1. Remove the passenger’s side upper radiator
hose. (See Fig. 8D-a.)
2. Modify the upper hose by cutting the hose just
after the bend. (See Fig. 8D-b.)
3. Attach the hose to the formed stainless tube
4FU014-010 with a #24 hose clamp.
4. A section of 1-1/2"ID hose left from the cool-
ant tube relocation will be cut to approximately
2-3/4" long and attached to the outlet of the
radiator reusing the factory spring clamp to
secure the hose to the outlet.
5. Install the formed coolant tube to the inlet on
the engine and to the radiator. Secure with
hose clamps. (See Fig. 8D-c.)
DISCARD THIS
SECTION OF
HOSE