Vortech 2005-2009 Ford 4.6L 3V Mustang GT - Manual (Page 2)

P/N: 8N020-120
© 2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
23SEPT08v3.0(8N..120v3.0)MaxflowPwrClr
iiii
FOREWORD
Take note of the following before proceeding:
1. Proper installation of this supercharger kit requires general automo-
tive mechanic knowledge and experience. Please browse through each
step of this instruction manual prior to beginning the installation to deter-
mine if you should refer the job to a professional installer/technician.
Please contact your dealer or Vortech Engineering for possible installers
in your area.
2. This product was designed for use on stock (un-modified, OEM)
vehicles. The PCM (computer), engine, transmission, drive axle
ratios and tire O.D. must be stock. If the vehicle or engine has been modi-
fied in any way, check with Vortech prior to installation and use of this product.
3. Use only premium grade fuel with a minimum of 91 octane (R+M/2).
4. Always listen for any sign of detonatlion (knocking/pinging) and discontinue hard
use (no boost) until the problem is resolved.
5. Vortech is not responsible for any clutch, transmission, drive-line or engine dam-
age.
Exclusions from Vortech warranty coverage considerations
include, but not limited to:
1. Neglect, abuse, lack of maintenance, abnormal operation or improper installation.
2. Continued operation with an impaired vehicle or sub-system.
3. The combined use of Vortech components with other modifications such as, but
not limited to, exhaust headers, aftermarket camshafts, nitrous oxide, third party
PCM programming or other such changes.
©2008 VORTECH ENGINEERING, LLC
All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, or translated into
another language in any form, by any means without written permission of Vortech Engineering, LLC.
This manual provides information on the installation, maintenance and service of the
Vortech supercharger kit expressly designed for this vehicle. All information, illustrations
and specifications contained herein are based on the latest product information available at
the time of this publication. Changes to the manual may be made at any time without
notice. Contact Vortech Engineering for any additional information regarding this kit and
any of these modifications at (805) 247-0226 8:00am-4:30pm PST.
STOP