Vortech 2005-2009 Ford 4.6L 3V Mustang GT - Manual (Page 4)

P/N: 8N020-120
© 2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
23SEPT08v3.0(8N..120v3.0)MaxflowPwrClr
iv iv
This product may not be legal for use on public roads in all 50 states.
Before starting the installation, verify that the Diablosport Flash Tool contains the
proper revision. Plug the tool into the vehicle’s OBD II port. Locate the tool revision
number in the upper right-hand corner of the main menu screen. 2005-2008 GTs &
V6s should have a revision #9R01 or greater. If not, you will need to update the
Diablosport Flash Tool.
NOTICES
(Read before installation is started)
Included in this kit is a smaller than originally supplied supercharger pulley. This new pulley is recommended
to achieve the best performance results. Removal of the factory sealed pulley will reduce the supercharger
warranty from three years to one year unless the supercharger unit (with the original pulley still attached) and
new pulley are sent into Vortech for removal, installation and re-sealing. If the supercharger warranty is not a
concern or if the supercharger warranty has expired, the pulley may simply be removed and replaced with the
new part supplied. Hammering/prying etc. on the supercharger and/or pulley will cause damage to the parts.
Light heating of the supercharger pulley with a propane torch (if the pulley is tight on the shaft) will aid remov-
al. A return authorization number is required before the supercharger and pulley are sent into Vortech. Call the
Vortech service department at (805) 247-0226 for a return authorization number. Return freight (ground) will
be paid by Vortech.
This product is protected by state common law, copyright and/or patent. All legal rights therein are reserved.
The design, layout, dimensions, geometry, and engineering features shown in this product are the exclusive
property of Vortech Engineering, LLC. This product may not be copied or duplicated in whole or part, abstract-
ly or fundamentally, intentionally or fortuitously, nor shall any design, dimension, or other information be incor-
porated into any product or apparatus without prior written consent of Vortech Engineering, LLC.
NOTE: Before you update the flash tool, it will be necessary to return your vehicle to its factory calibration.
1. Connect the Flash tool to the vehicle’s OBD II port.
2. In the main menu screen select option.
3. From the options menu using the arrow keys page down to troubleshooting and press enter.
4. From the Troubleshooting menu, page down and select Restore Factory backup.
5. Follow the directions on the screen.
6. Once the Factory Backup has been installed, unplug Flash Tool.
After the vehicle has been returned to its Factory Calibration, it will be necessary to update the Diablosport
Flash Tool. This can be done in one of two ways: you can download the revision from www.diablosport.com or,
if for any reason you do not feel comfortable with doing the update, please return the Flash Tool to Vortech
Engineering for the update.
If you choose to update the Flash Tool from www.diablosport.com:
• In Diablosport’s home page in the upper left-hand corner find the search window.
• Type in the part number for your application and click “SEARCH”.
2005-2008 Model Years, enter “VR7140”
• If multiple results are found, click on the result that contains the desired part number in the descrip-
tion.
• After selecting the part number for your application, verify the supported application description is
correct.
• Download the “Revision update instructions” found at the bottom of the page and follow the included
instructions.
STOP