Kirby Sentria - Manual (Page 13)

12
Upright & Portable Cleaner
THE UPRIGHT CLEANER
Before you begin vacuuming, it’s important to have the Power Nozzle
 25 adjusted to the proper height setting. This gives you the most
efficient cleaning action.
The proper height setting can be achieved by doing the following: ➤
Turn the Sentria® system on by pressing the Power Switch. ➤
Press the Toe-Touch Control Upper Pedal  8 as often as necessary
to lower the nozzle to its lowest setting. ➤
Press the Toe-Touch Control Lower Pedal  9 one notch at a time to
raise the Power Nozzle to the desired height.
Listen for the click with each raised notch. Count the clicks to the
desired setting.
Raise Unit Purpose
Lowest position Recommended: Carpets
1 Click up Optional: Deep Pile Carpeting
2 Clicks up Optional: Long Fiber Carpeting
3 Clicks up Recommended: Pet Hair Removal
4+ Clicks up Hose and Attachments ➤
1
2
3
If desired, engage Tech Drive® power assist by pushing down the
red “D” side (marked “D” for Drive) of the Tech Drive N/D Pedal
 12 located just below the Power Switch  13 . ➤
4