Kirby Sentria - Manual (Page 22)

21
USING AS A BLOWER
Your Sentria® system may now be used as a blower.
By attaching the Inflator/Deflator Tool to the Attachment Hose, you can
inflate toys, air mattresses or any other low-pressure inflatable item up
to 1 p.s.i. (pounds per square inch of air pressure). ➤
To deflate items, connect the Attachment Hose to the front of the unit
and connect the Inflator/Deflator Tool to the Attachment Hose. Then
connect the Bag Assembly to the Air Exhaust Port.
You may now use your Sentria system to deflate items.
Canister Cleaner & Attachments
THE PORTABLE SPRAYER
The Portable Sprayer is used only in the Blower Mode. It is an excellent
tool to apply many different types of water-based liquids to any type of
surface. The spray can be adjusted ranging from very fine to coarse.
PORTABLE SPRAYER SET-UP
Unscrew the jar from the Portable Sprayer and fill ¾ full with
non-flammable liquid. Before reinstalling the jar, make sure the
portable sprayer dip tube is attached to the spray gun body. ➤
Screw the jar tightly on the Portable Sprayer and attach the Portable
Sprayer to the end of the Attachment Hose in the Blower Mode.
Make certain your Sentria® system is set up as a Blower Unit. The
Attachment Hose should be connected to the Air Exhaust Port  19 . ❏
1
2