Kirby Sentria - Manual (Page 31)

30
Optional Accessories
Remove and clean the Suds Screen Cap, Cup and Sponge Filter.
Rinse out the Shampoo Tank with cold water and replace the
Screen Cap, Cup and Sponge Filter.
NOTE: The belt should not be stretched for extended periods. Make
sure the green arrows on the nozzle line up for storage. (Remember
to align the red arrows before replacing the nozzle on the unit - see
Belt Lifter section on page 10.) ❏
9
CLEANING THE CARPET SHAMPOO SYSTEM (cont)
To remove the Shampoo Tank from the Air Exhaust Port  19 ,
rotate it away from the Sentria® system as far as it will go,
then lift it upwards. ➤
8