Kirby Sentria - Manual (Page 24)

23
PORTABLE SHAMPOOER SET-UP
The Portable Shampooer is used in the Blower Mode only. It is
designed for fast and easy cleaning of carpeted stairways and areas
that are difficult to reach with the Carpet Shampoo System.
To set up the Portable Shampooer, attach the Portable Shampooer
cap to the end of the Portable Sprayer. ➤
The spray opening on the front of the Sprayer also pulls out so
that the inside of the Sprayer and the nozzle jet can be cleaned.
To remove the nozzle jet, press on the two latches on the front of the
nozzle jet and pull it out. (The latches must be aligned with the holes on
the front of the Sprayer when returning the nozzle jet to the front of the
Sprayer.)
Then, fill the jar with water. Spray water until the spray becomes clear.
Reassemble the Sprayer after cleaning so none of the parts will be lost. ❏
WARNING: Never clean the Portable Sprayer with flammable cleaning fluids.
The motor is open to the spray and could ignite the spray.
!
CLEANING THE PORTABLE SPRAYER
Immediately after use, empty the Portable Sprayer jar and wash
with warm soapy water. ➤
The Portable Sprayer dip tube should also be removed and washed.
(Make sure to reinstall it after cleaning.) ➤
Canister Cleaner & Attachments
2
1
1
3