Kirby Sentria - Manual (Page 40)

39
CAUTION: While using the Zippbrush, do not insert fingers into the revolving brush
area or push the release button while the brush is in motion. Keep brush
flat against the surface being cleaned as the brush can throw particles
outward. Do not use on delicate fabrics.
USING THE ZIPPBRUSH
When attached to the Attachment Hose, the Zippbrush can be used for
a wide variety of cleaning surfaces, including upholstery, and carpeted
steps. It can be used to clean automotive interiors.
For optimum results, do not press down heavily on the Zippbrush.
Allow the brush to rotate at maximum speed by gently moving it side
to side on the surface being cleaned.
Optional Accessories
CLEANING THE ZIPPBRUSH
To clean the Zippbrush, press the button on the front of the brush
to release the outer brush ring.
When pressing the release button, avoid placing pressure on the
outer ring brush. ➤
Lift the center Brush/Air Turbine out of the tool and remove any
particles or lint from the brush and turbine. Also remove any
particles left in the tool cavity. ➤
Place the Brush/Air Turbine back in the tool and turn it until the
tabs drop into the slots. Hook the tab on the rear of the brush ring
into the small opening of the tool and snap it back into place. ❏
1
2
3
!