Kirby Sentria - Manual (Page 33)

32
USING THE KIRBY MIRACLE WAXER®
FLOOR POLISHER
To assemble the roller waxer applicator, attach the top half of the
roller waxer handle to the bottom half (if not already done). Adjust
the upper half until the spring-loaded pin in the lower half is seated in
the hole near the bottom of the upper half. ➤
Optional Accessories
1
Pull the roller bag off the wax roller and save the packing bag. Begin
waxing according to the directions in box on previous page. ➤
3
With the wax roller bag facing the hooked end of the long roller
handle, push the wax roller over the connector on the bottom of
the handle until secure. ➤
2