Kirby Sentria - Manual (Page 18)

17
CAUTION:
In normal operation, friction between the belt and the metal motor
shaft may cause the metal motor shaft to become hot to the touch.
CAUTION: Keep motor shaft free from lint, hair, and debris build-up.
Lock the Attachment Hose Connector in place by turning the
Accessory Lock  22 all the way to the right (clockwise). (Accessory
Lock will clamp the Attachment Hose to the unit.) Then lower the
Headlight Hood.
With the Attachment Hose in place, the unit will automatically adjust to
high speed for hose operation.
NOTE: If the Sentria system will not run when the Power Switch is
ON, see page 44. ❏
At the connector end of the Attachment Hose, you will notice two
hooks. Place the hooks over the ends of the Attaching Bar  24 , then
push the opening of the hose up against the Sentria® system. ➤
4
5
!
!
Canister Cleaner & Attachments
EXTENSION TUBES
One or two Extension Tubes can be attached to the end of the hose to
extend your reach and efficiently use various attachments. ❏
INSTALLING ATTACHMENTS ON THE
ATTACHMENT HOSE
To attach tools to the hose, push lightly while twisting the smaller end
of the hose into the tool. ❏