Kirby Sentria - Manual (Page 19)

18
Canister Cleaner & Attachments
DUSTER BRUSH
The Duster Brush may be connected to the Attachment Hose or the
Extension Tubes to remove dust from any surface, including contoured
or irregular surfaces. ❏
SURFACE NOZZLE UNDER LOW
FURNITURE/BARE FLOORS
The Surface Nozzle should be used on bare floors or for surface
cleaning carpets and under low furniture.
Rubber wheels on the nozzle allow it to glide silently on the surface of
hard floors without scratching and vacuum with maximum power. ❏
WALL & CEILING BRUSH
To vacuum walls, ceilings, drapes and other surfaces, attach the Wall
& Ceiling Brush to the Suction Control Grip. Then attach the Suction
Control Grip to the Extension Tube(s) as shown. In addition to providing
suction relief, the Suction Control Grip provides the proper angle to
comfortably vacuum walls and ceilings.
Tip: To vacuum the top of door frames or ledges, or books on a
bookshelf, rotate the Wall & Ceiling Brush 180°. ❏
CREVICE TOOL WITH REMOVABLE BRUSH
Without the removable brush, the Crevice Tool can be used for cleaning
cracks, crevices, corners, grooves and narrow openings.
Install the removable brush in the end of the Crevice Tool to remove
dirt from corners, button tufts, between radiator coils and sliding
window tracks. ❏
UPHOLSTERY NOZZLE
The Upholstery Nozzle is used for cleaning upholstered furniture,
carpeted steps, and clothing. It can also be used to clean the inside
of cars. ❏