Getting started – Kirby Sentria User Manual

Page 9

Advertising
background image

8

Getting Started

To remove a used Disposable Filter Bag.
Unzip the Outer Permanent Bag and pull out the Disposable Filter Bag

along with the Top Adaptor.
Flip up the cardboard tabs that attach the Disposable Filter Bag to the

Top Adaptor. Holding the cardboard tabs, pull the cardboard faceplate

on the Disposable Bag away from the Top Adaptor.

To install a new Disposable Filter Bag.

With the Outer Permanent Bag unzipped and the Top Adaptor

pulled out, rest the base of the cardboard faceplate against the

bottom tab of the Top Adaptor.

Then, pivot the cardboard faceplate up against the flat surface

of the Top Adaptor.

Bend the cardboard tabs at the top of the

faceplate onto the holders at the top of the Top Adaptor.

Finally, insert the Top Adaptor and new Disposable Filter Bag into the

Outer Permanent Bag and close the zipper completely.
NOTE: A Disposable Filter Bag must be installed before vacuuming.

Always replace the Disposable Filter Bag when dirt reaches the FULL

line on the Disposable Filter Bag. Failure to do so will affect performance.

CAUTION: Before changing the Disposable Filter Bag, unplug the power cord from

the wall outlet and be sure that the motor and fan have stopped.

!

Use only genuine Kirby® “Style F” Disposable Filter Bags.

THIS SENTRIA

®

HOME CARE SYSTEM USES KIRBY’S

IMPROVED “STYLE F” DISPOSABLE FILTER BAGS.

Functional fit • Easy to install

2

1

3

Advertising