Altera HyperTransport MegaCore Function - Manual (Page 16)

2–8 Chapter 2: Getting Started
MegaCore Function Walkthrough
HyperTransport MegaCore Function User Guide © November 2009 Altera Corporation
7. Click Next. The Advanced Settings tab displays.
8. You set the receiver virtual channel buffer sizes and the maximum allowed delay
from the deassertion of TxRDav_o to the assertion of TxRSop_i on the Advanced
Settings tab. For more information about these parameters, refer to Table A–4 on
page A–3 . For this walkthrough, use the default settings, which are shown in
Figure 2–8 .
Figure 2–7. Parameterize—Clocking Options Tab