CIRCUTOR computer PLUS-TF Series - Manual (Page 22)

22
Fig. 11.- Default screen in the STOP mode
Fig. 12.- Default screen in the RUN mode
Fig. 13.- Main Menu Screen
All screens will display the menu browsing options on the lower part of the screen, which must be selected
by pressing the
F1 F2 F3 or F4 keys, depending on the option selected. Therefore, to move from the
default screen (Fig. 11) to the main menu (Fig. 13), press F1 .
Computer plus will jump directly to the default screen (Fig. 11 or Fig. 12) when no key has been pressed
during a period of two minutes.
5.3 Basic options of the Main Menu
After powering the Computer plus and completing the start-up process, simply press the F1 key various
times to access the main menu (Fig.13).
6 folders will be displayed on the main menu, which correspond to the basic functions that can be
executed by Computer Plus . Said functions are:
 Measure : Displays the parameters measured (Voltages and currents) and other parameters
calculated (Power, power factor, etc.)
 Setup : Used to adjust the unit and adapt it to the application conditions.