CIRCUTOR computer PLUS-TF Series - Manual (Page 23)

23
 Set Alarm : (Alarm Setup). Used to adjust the maximum and minimum trip, delay, etc. values.
 Alarms : Shows the state of alarms
 Harmonics: Shows the voltage and current harmonics.
 Test: Manual connection and disconnection of steps and test of the system
On the bottom of the main menu there are a series of menu options that can be selected with the F1 F2 F3
and F4 keys. The different menu options are:
Access a screen that indicates the name of the unit, and the model, version and serial number (Fig.
10).
Used to browse through the main menu and select the desired option.
To select an option and access the desired menu.
5.4 Editing numerical or literal fields
 Many menus show the option to edit numerical or literal fields. Editing is usually done as follows:
 Press the Edit key and the following menu will be displayed:
 Select the field you wish to edit and press
 The menu will be displayed
 When editing numbers, press the key to change the number being edited, which will appear
underlined and with you can change the numerical value in cycles (0 to 9). When you reach the
value desired, move onto the following character and press when you are finished.

If the value edited is incorrect or out of the limits, then when you press the previous value will be
kept.
 When you wish to edit fields with different options, menu will be
displayed, and you can change the option with the key. When you reach the desired value, press