d&b V-Series - Manual (Page 19)

2.11. Cabinet rigging mechanism
V-Series cabinets are mechanically connected to the V Flying frame
and subsequent loudspeakers using the Front links attached to both
sides of the cabinet front and the central Splay/Rear link at the
rear of the cabinet.
All necessary rigging components are mounted to the cabinet and
slide out when needed.
In principle, the Front link mechanism applies to both the V8/V12
and V-SUB cabinets.
2.11.1. Front link mechanism
V8/V12
1. Release both Locking pins and slide out the Front link.
2. Insert and lock one Locking pin to the upper hole to fix the link
in place.
V-SUB
The Front link mechanism of the SUB cabinets provides four
different settings:
a. SUB to Frame (Þ Fig. 1)
b. SUB to SUB with 0° splay between the cabinets (Þ Fig. 2).
c. SUB to SUB with 2.5° splay (free Þ Fig. 3) between the
cabinets.
d. SUB to SUB with 2.5° splay (blocked Þ Fig. 4) between the
cabinets.
This setting is used to prevent the cabinets from folding up.
Fig. 1: SUB to Frame Fig. 2: SUB to SUB, 0° splay Fig. 3: SUB to SUB, 2.5° splay,
free Fig. 4: SUB to SUB, 2.5° splay,
blocked
V8/V12 Front link mechanism
V-SUB Front link mechanism
d&b V-Series Rigging manual (1.9 EN) 19