d&b V-Series - Manual (Page 43)

7.1. Transport / Storing
During transport ensure the rigging components are not stressed or
damaged by mechanical forces. Use suitable transport cases.
We recommend the use of the d&b E7463 or E7464 V Touring
cart for this purpose.
Due to their surface treatment the rigging components are
temporarily protected against moisture. However, ensure the
components are in a dry state while stored or during transport and
use.
7.2. Visual and functional inspection
WARNING!
Potential risk of personal injury and/or
damage to material
To eliminate the potential risk of accident due to malfunctioning of
a component, regularly inspect all system components.
Cabinet enclosure
–
Visual inspection of all fitting plates for obvious damage (e.g.
cracks or corrosion).
– Visual inspection of the rear rigging strand for obvious
damage (e.g. cracks, deformation or corrosion) including all
drilled holes of the component.
– Inspection of all fitting plates including front grills to ensure
they are securely attached.
– Regularly lubricate the sockets using WD-40 ® or a similar
product.
Front and Splay (Rear) links
Visual inspection regarding deformation and damage (e.g. cracks
and corrosion) including all drilled holes of the component.
Locking pins
–
Visual inspection for deformation, cracks and corrosion of the
component.
– Inspection for missing ball bearings and damage.
– Functional inspection of the release mechanism to ensure it
operates properly.
– Regularly lubricate the Locking pins using WD-40 ® or a similar
product.
7. Care and maintenance / Disposal
d&b V-Series Rigging manual (1.9 EN) 43