Cabinet assembly below v-sub cabinets, Cart storage – d&b V-Series User Manual
Page 34
3.3.1.3. Cabinet assembly below V-SUB cabinets
Mounting the cabinet assembly below already suspended V-SUB
cabinets is similar to the procedure described in the previous
section Þ Chapter 3.3.1.2. "Cabinet assembly below V8/V12
However, due to the possible size and weight of the suspended
SUB assembly, carry out the assembly very carefully and
considerably.
We recommend you to apply and fix the splay angles of the TOP
cabinets in the cart manually, before attaching the SUB assembly.
For this purpose proceed as follwos:
Apply and fix the preset splay angles manually
1. Raise the back of the cabinet until the Splay link has hooked
into the preset Locking pin of the bottom cabinet.
2. Hold the cabinet in place and insert the second Locking pin
(Safety pin) to fix the Splay link.
To apply and fix the splay angles of further cabinets, proceed in
the same manner.
3.3.1.4. Cart storage
The most space-saving way to store the carts during an event is to
place the connecting poles into the bottom tray and attach the top
lid to the bottom tray.
The conical connectors of the bottom tray will keep the top lid fixed
in place.
d&b V-Series Rigging manual (1.9 EN)
34